Loomis Laboratory Piston Extruders
| Technical specification 232-16 DTM | Technical specification 232-25 DT | |
| Hydraulik cylinder | ||
| Ram force | 0 - 165 kN (0 -16,8 to) | 0 - 253 Kn (0 - 25,7 to) |
| Ram speed (fast forard): | 0 - 450 mm / min | 0 - 600 mm / min |
| Ram speed (retract): | 0 - 520 mm / min | 480 mm / min |
| Extrusion speed | 0 - 350 mm / min (acc. to material and die) |
0 - 350 mm / min (acc. to material and die) |
| Material cylinder | ||
| Barrel diameter: | 60,00 mm up to 90 mm (option) |
90,00 mm up to 125,00 mm (option) |
| Barrel length: | 200,00 mm up to 300,00 mm (option) |
300,00 mm up to 600,00 mm (option) |
| Theoretical max. past pressure |
approx. 550 bar @ 60,00 mm barrel diameter |
approx. 400 bar @ 90,00 mm barrel diameter |
| Hydraulik unit | ||
| System pressure: | 210 bar (max) | approx. 210 bar (max) |
| Motor output rating: | 1,5 kW | 3,0 kW |
| Vacuum system | ||
| Pumping speed: | 1,75 Nm³/h | 1,75 Nm³/h |
| Motor output rating | 0,25 kW | 0,25 kW |
| Electrical requirements | ||
| Supply voltage: | 380 - 415 V, 50/60 Hz (3Ph, N + PE) or as specified |
380 - 415 V, 50/60 Hz (3Ph, N + PE) or as specified |
| Control voltage: | 24 VDC (internally transformed) | 24 VDC (internally transformed) |
| Installed load: | 2,0 kW | 3,5 kW |
| Press sizes | ||
| L x W x H | 1.575 x 900 x 1.350 (2,100) mm | 1.680 x 1.050 x 1.450 (2.365) mm |
| Press weight | ||
| approx. 450 kg | approx. 550 kg |
